Product Overview

POE-SW4P-2G-65 is a 6-port 100M digital PoE switch independently developed by Kedi Communication, providing 6 10/100M adaptive RJ45 ports. 2*100M RJ45 Uplink ports. Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions. The downstream ports all support the IEEE802.3af/at standard PoE power supply function, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable. The device supports digital display of power to prevent overload of usage. The device is plug and play, no configuration is required, and it is simple and convenient to use. It can be used in the access layer of security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprises.

Product Features

• Support one-key Switch, VLAN, Extend
• Large buffer design, high-definition video does not freeze
• Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow
• Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions

Operating Mode

• Provides three exchange modes.
• Standard mode: All ports can communicate freely after opening. Suitable for ordinary data transmission environment
• VLAN mode: After opening, all downstream ports cannot communicate with each other, which can isolate broadcast storms and prevent ARP viruses
• Extend mode: After opening, the rate of all downlink ports becomes 10M, and the transmission distance can reach 250m.

PoE Power Supply Capability

• Support IEEE 802.3af/at PoE power supply standard
• The maximum output power of a single port can reach 30W
• Smart Link power management, Step Link step-by-step start function to escort the safe and stable operation of Kedi PoE switches;
• Automatic detection and identification of standard PoE power receiving equipment, intelligent power supply,will not burn non-standard PoE power receiving equipment or ordinary equipment
• The PoE port supports a priority mechanism, when the remaining power is insufficient, the power supply of the high-priority port is guaranteed first

Product Reliability

• The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.
• High redundancy design, providing long-term stable PoE power output.
• 0~45℃ working temperature improves product stability in a wide temperature environment

Easy To Use

• Plug and play, no need to configure, simple and convenient
• Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act), and digital tube power display

• High-performance 24-port gigabit PoE switch with dual gigabit SFP uplink ports for seamless network aggregation.
• Operating on a 52Gbps non-blocking bandwidth and an 8K MAC address capacity, it ensures line-rate packet forwarding at 38.69Mpps using IEEE 802.3x full-duplex flow control.
• The 24 gigabit PoE ports supply up to 30W per channel under a 250W total power budget, adhering to IEEE 802.3af/at standards.
• This plug-and-play network solution features a compact 440mm rackmount chassis designed for stable operation within a 0°C to 45°C environmental specification.

• This 2-port10/100/1000M Desktop PoE repeater Ethernet switch provides an easier installation
  way for PoE devices, such as IP cameras, wireless AP, VoIP. It supports 2 10/100/1000Mbps
  PSE (Power Source Equipment) ports and 1 10/100/1000Mbps PD (Power Devices) ports.
• There is no need to use the power adaptor, as this PoE switch can work through receiving power
  other PoE switch or equipment by PD port, and the PSE ports can supply the power to the other
  PD devices like PoE IP cameras, wireless AP, VoIP. The max transmission distance is 100
  meters with Cat5 cables.
• Plug & play design make the installation quite easy, users do not need any configuration, which
  make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.